Joiner Derby

If you're after a joiner in Derby who can build cabinets, solid-wood worktops or fitted storage to the exact dimensions of your kitchen rather than a standard flat-pack width, that work is fabricated in-house at the workshop on Stenson Road in Sunny Hill and then fitted on site across the city and surrounding villages. A lot of the kitchens the team works in - older terraces near the Arboretum with a narrow galley layout, or semis in Chaddesden and Mickleover with a chimney breast eating into one corner - have a wall or ceiling a few centimetres out of true, which is exactly where flat-pack units start needing filler panels and gaps to hide them.

A typical job is measured on site first, then built at the workshop - a solid oak worktop scribed to a wonky wall, a run of shaker cabinets sized around an awkward alcove, or a made-to-measure larder unit for a space no standard cupboard would fit. Because joinery, plumbing, electrics and stone worktop fitting all sit under one roof, a job that also needs a socket moved or a hob reconnected doesn't mean waiting on a separate contractor to turn up.

• Bespoke cabinet doors and drawer fronts in shaker, raised-panel, slab, beadboard or glass-paneled styles, hand-fitted with soft-close hinges
• Solid timber worktops in oak, walnut, beech, maple or cherry, plus butcher-block and reclaimed-timber options, scribed and sealed in place
• Breakfast bars and peninsula bar tops with integrated storage, lighting and power point provision
• Fitted and floating shelving, corner units and built-in bookcases made to the exact dimensions of the wall
• Bespoke storage such as pull-out larders, dovetail drawer boxes, under-stairs conversions and window-seat benches
• Handcrafted kitchen tables, benches and banquette seating built to match the rest of the kitchen's timber and finish
• Workshop fabrication at the Derby workshop followed by on-site fitting, adjustment and finishing

• Stone, granite and quartz worktops - these are laser templated and jointed by the company's stonemason team rather than the joinery workshop
• Gas hob or range cooker connections, carried out separately by Gas Safe registered engineers
• New sockets, lighting circuits or rewiring, carried out by Part P registered electricians who issue the safety certificate
• Sink and tap plumbing connections, carried out by plumbers qualified to NVQ Level 2 and City & Guilds
• Spraying or resurfacing existing doors rather than replacing them - that's handled as a separate spray-finishing service
• Clearing old units on a door-only or single-element job isn't automatic - confirm at quote stage whether removal and disposal is included

Derby Kitchen Fitter grew out of a straightforward frustration: too many kitchen jobs were split across separate contractors who didn't talk to each other, leaving the customer to work out who was responsible when a door didn't hang right or a joint opened up after a few months. The joinery side of the business works the other way round - cabinetry and solid-wood worktops are built at the Stenson Road workshop by joiners with a bench-joinery background and formal City & Guilds training, then given time to acclimatise before they're fitted on site, rather than assembled from a flat-pack kit the same afternoon. Because the same company plans, supplies and fits the whole kitchen, a joinery job that also needs a socket moved, a hob reconnected or a stone worktop jointed in an adjoining utility room stays with tradespeople already on the project - electrics with Part P registered electricians who issue the safety certificate, gas work with Gas Safe registered engineers, and stone or quartz with the in-house stonemason team - rather than being handed off to someone unfamiliar with the job. That bench-joinery training shows up in details that are easy to miss on a showroom floor - solid timber left to acclimatise in the workshop before it's scribed to a wall that's out of true, dovetail joints rather than screws holding a drawer box together, and a damaged edge that can be sanded back and refinished instead of the whole panel being swapped out - all backed by a 5-year labour and installation guarantee and a 2-year guarantee on materials.

The workshop is based on Stenson Road in Sunny Hill, Derby (DE23), and cabinetry, worktops and fitted storage made there are fitted in kitchens right across the city - from Victorian terraces near the Arboretum with a narrow galley kitchen through to newer estates such as Chellaston and Oakwood, which more often call for a longer run of standard-width units set against a still-drying plasterboard stud wall rather than a scribed fit. Out towards Belper, Duffield and Ripley, a lot of the housing stock is older stone-built property with thicker, less regular walls that need a worktop scribed rather than cut dead straight, and further out towards Matlock, Wirksworth and Bakewell on the Peak District fringe, van access and parking on older high streets is often tighter and gets planned into the job at quote stage rather than left to sort out on the day. The same team also fits regularly in Chesterfield, Long Eaton, Ilkeston, Heanor, Alfreton, Swadlincote, Dronfield and Nottingham.

Quick Free Estimate - No Obligation

Fully Insured • Response within 15 mins

🔒 Your details are safe with us. No spam, ever.