Complete Kitchen Remodeling Derby
Free Consultation
01332-529933
If your kitchen needs more than new cabinet doors - damp behind the units, wiring that's past its best, a layout that never worked - a full strip-out-and-rebuild is usually the more sensible route than another round of patch repairs. Derby Kitchen Fitter has been planning, supplying and fitting kitchens across Derby and its surrounding towns for around 20 years, and every trade a remodel needs, from the bespoke cabinetry to the stone worktops, is handled by the same crew rather than a chain of subcontractors you have to chase and manage yourself.For a closer look at what a project like this actually costs once site conditions are factored in, our kitchen renovation cost breakdown sets out the detail behind the price ranges below.
Where the Remodel Price Stops - Not Included / Costed Separately
- Structural calculations and Building Control fees for removing a load-bearing wall - priced separately once the wall's construction is confirmed on site
- A new boiler or new gas supply pipework - our Gas Safe engineers reconnect and commission what's already there; swapping the boiler itself is a separate job
- Extending the kitchen's footprint, such as knocking through to a garage or adding an extension - that's scoped as its own building project alongside the remodel
- Redecorating rooms outside the kitchen, and replacing external doors or windows
- Removing asbestos-containing materials if they turn up in an older property - this needs a licensed specialist and is quoted once identified
Getting a Fixed Price, Not Just a Ballpark
The ranges given above are a starting point for budgeting, not a fixed quote. The actual figure depends on what the site survey finds once someone's measured the room, looked behind the units and checked the existing plumbing and wiring. A terraced kitchen with sound walls and a straightforward layout costs less to remodel than one with damp behind the units or wiring that needs bringing up to current regs. The written quote is itemised and comes after that visit, so you know what you're paying for before anything is agreed.
One Project-Managed Team vs Coordinating Trades Yourself
| What matters | Derby Kitchen Fitter | Coordinating tradespeople yourself |
|---|---|---|
| Who you deal with | One project-managed team from first measurement to sign-off | A joiner, plumber, electrician and plasterer, each booked and managed separately |
| Qualified trades on site | Part P electricians, Gas Safe engineers, NVQ Level 2 plumbers and City & Guilds joiners working to one schedule | Each trade vetted individually, working to their own separate diaries |
| Old kitchen removal | Cleared and disposed of legally by a registered waste carrier as part of the job | Skip hire or waste transfer arranged and paid for separately |
| If something needs fixing afterwards | 5-year labour and installation guarantee, one company to call | Guarantee is only as good as whichever tradesperson did that particular job |
| Fitting a kitchen you've already bought | Fitted as an independent installer for brands including Howdens, Wren Kitchens, Magnet and premium German handleless systems | You still need to find and manage a fitter separately |
Every Trade a Full Remodel Needs, In-House
A full remodel means stripping the kitchen back to bare walls, and on older Derby and Derbyshire properties that often uncovers stud partitions or lath-and-plaster underneath rather than modern plasterboard. That's real work for the team's master plasterers, who bring decades of hands-on site experience to getting those walls flat and sound before a single cabinet goes up — not a job a generalist can shortcut. It's that kind of unknown, uncovered only once the old kitchen's out, that's the real case for having every trade lined up under one roof rather than booked separately: City & Guilds-trained joiners with a bench-joinery background building the cabinetry, plumbers qualified to NVQ Level 2 and City & Guilds making the water connections, and Part P registered electricians issuing full safety certificates for the new lighting and power circuits. Where a gas hob or range cooker needs connecting, a Gas Safe registered engineer commissions it. The team also clears the old kitchen as a registered waste carrier, is a member of CITB and FSB, and fits kitchens bought separately from Howdens, Wren Kitchens, Magnet or premium German handleless ranges just as readily as its own designs — all covered by the same 5-year labour and installation guarantee and 2-year product guarantee, put in writing before the job starts.
Further Afield Than Derby's Own Suburbs
Alongside the Derby suburbs listed above, the same complete remodel service covers the surrounding towns — Belper, Ilkeston, Alfreton, Heanor, Ripley, Duffield and Wirksworth — and reaches into Chesterfield, Matlock, Buxton, Swadlincote and Nottingham. Older housing stock in market towns such as Wirksworth and Belper often means stud partition or lath-and-plaster walls rather than modern plasterboard, which changes how much wall repair a remodel needs before cabinets can go up. That's the kind of thing the site survey picks up before a price is fixed, not after the old kitchen's already out.
Got Questions?
Frequently Asked Questions
Are the people fitting my kitchen actually qualified tradespeople?
Yes. Plumbing connections are carried out by plumbers qualified to NVQ Level 2 and City & Guilds, electrical work by Part P registered electricians who issue full safety certificates, and gas hob or range cooker connections by Gas Safe registered engineers. Cabinetry is built by joiners with City & Guilds training and a bench-joinery background, and plastering is handled by master plasterers with decades of site experience. It's one managed crew of qualified trades, not casual labour brought in for the day.
What happens to my old kitchen once it comes out?
Derby Kitchen Fitter is a registered waste carrier, so the old units, worktops and any rubble from structural work are removed and disposed of legally as part of the job. You don't need to arrange a skip or a separate waste collection unless you'd rather handle that side yourself.
I've already bought a kitchen from Howdens, Wren or Magnet - can you still fit it?
Yes. Derby Kitchen Fitter works as an independent installation specialist for major supply-only brands including Howdens, Wren Kitchens, Magnet and premium German handleless systems, alongside the building, plumbing, electrical and plastering work a full remodel needs. You don't have to buy your units through us to get the rest of the project managed as one job.
20 Years' Experience • 5-Year Guarantee • Licensed Waste Removal
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.