Custom Kitchen Furniture Design Derby
Free Consultation
01332-529933
If you want a bench, dresser, island or fitted wardrobe built to fit an actual Derby kitchen rather than a stock size off a shelf, we design and hand-build it in our own joinery workshop on Stenson Road in Sunny Hill, Derby DE23, then deliver and fit it ourselves. We work throughout Derby and out into the surrounding towns - Chesterfield, Long Eaton, Belper, Ilkeston, Heanor, Alfreton, Swadlincote, Ripley, Matlock, Dronfield, Duffield, Wirksworth, Bakewell, Buxton and Nottingham - and because the same joiners who build the piece also deliver and fit it, awkward routes through terraced Derby streets or period cottages with narrow staircases get measured and planned before anything leaves the workshop.
Furniture built this way sits alongside a full kitchen fitting service, so a new bench or island can be matched to units, worktops and hardware we've already fitted, or to a kitchen someone else supplied.
What's Included When You Commission Custom Kitchen Furniture
- A design visit in your home to take measurements, discuss materials and sketch initial ideas
- Wood and finish samples so you can see how a species and stain will look against your existing units and lighting
- Detailed design drawings and a fixed-price written quotation before any timber is cut
- Hand-cut joinery (dovetail and mortise-and-tenon construction) built in our Derby workshop
- Delivery, positioning and final on-site adjustment, with access routes measured in advance for larger pieces
- Finish and colour matched to your existing fitted units, worktops and hardware where the new furniture sits alongside a Derby Kitchen Fitter kitchen
Not Included / Costed Separately
- Upholstery fabric and padding for bench and banquette seating is arranged through our partner upholsterers and quoted as a separate line
- Any structural work needed to support a heavy island, such as reinforcing a floor, is surveyed and priced separately
- Plumbing for a wet island or electrics for integrated sockets and lighting are quoted separately and carried out by our own Part P registered electricians or NVQ Level 2 plumbers, not included in the base joinery price
- Exotic or reclaimed timber species, complex extending mechanisms and multiple upholstery changes sit above the standard price ranges already quoted on this page
- Turnaround faster than our normal build times isn't guaranteed and may not be possible during busy periods such as before Christmas or during the summer renovation season
How Bespoke Joinery Compares to Flat-Pack and Supply-Only Furniture
| Derby Kitchen Fitter bespoke joinery | Flat-pack/off-the-shelf furniture | Supply-only kitchen furniture | |
|---|---|---|---|
| Construction | Hand-cut dovetail and mortise-and-tenon joints, built in our Derby workshop | Cam-lock and staple fixings assembled from flat panels | Factory-made carcasses; joinery quality varies by brand |
| Sizing | Made to your exact measurements, including alcoves and period-property quirks | Fixed standard sizes with limited adjustment | Modular sizes; gaps need filler panels in non-standard spaces |
| Who fits it | The same joiners who designed it, so there's one point of contact throughout | Self-assembly or a fitter you source yourself | Usually subcontracted separately from the supply order |
| Finish matching | Timber, stain and hardware matched to your existing fitted kitchen | Limited to the manufacturer's current range | Matched only within that brand's own product line |
| Typical lead time | 4-12 weeks depending on complexity | Often in stock or short order | Varies by brand, frequently several weeks |
Furniture Built by the Same Team That Fits Your Kitchen
Derby Kitchen Fitter started because too many homeowners were being passed between separate contractors, with nobody accountable once the mismatched finishes started showing their age. Our own bench-trained joiners cut every dovetail and mortise-and-tenon joint on this page in our Derby workshop, and because we're also an independent installation specialist for supply-only ranges including Howdens, Wren Kitchens, Magnet and premium German handleless systems, that same experience carries over to matching a new bench, dresser or island against units we didn't originally fit as well as against ones we did. If a piece needs power or plumbing built in - a wired island, say, or a dresser with an integrated drinks fridge - that work stays inside the same team rather than being handed to a subcontractor you've never met, and any offcuts or old units leave site with a registered waste carrier rather than in a skip on your drive. We put that approach in writing before a single board is cut: we only build furniture to the standard we'd want in our own homes.
Where We Build and Deliver, From Sunny Hill to the Peak District Edge
Our workshop sits on Stenson Road in Sunny Hill, on the south side of Derby, and every piece is delivered from there once it's built. Most commissions are for customers in Derby itself, but we regularly build and fit for Long Eaton, Ilkeston, Heanor, Alfreton, Belper and Duffield, and further out for Chesterfield, Ripley, Dronfield and Swadlincote. Deliveries into the Peak District towns of Matlock, Bakewell, Buxton and Wirksworth take a bit more planning, since the approach roads are narrower and hillier than in town, so a large island or dresser gets its route checked before a delivery day is booked. We also cover Nottingham on request.
Frequently Asked Questions
How Much Does Custom Kitchen Furniture Cost in Derby?
Custom furniture is an investment, but it doesn't have to break the bank. The cost depends on several factors: Size and complexity of the pieces Materials chosen (some exotic woods cost more) Special features (extendable tables, complex joinery) Finishes and additional elements (upholstery, glass, etc.) As a rough guide, our custom kitchen tables typically range from £800 for a simple breakfast table to £2,500+ for a large dining table in premium hardwood. Seating options start around £250 per chair, with banquette seating priced by linear foot depending on storage features and upholstery choices. Storage pieces like pantry cabinets and dressers typically range from £1,200 to £3,000 depending on size and complexity. While this is more than mass-produced furniture, our pieces are built to l
How Long Does Custom Kitchen Furniture Take to Make?
Timing is often important for kitchen projects, and we work to clear schedules that you can plan around. Typically, from initial consultation to installation: Simple pieces (tables, chairs, stools): 4-6 weeks Storage furniture (dressers, pantries): 6-8 weeks Complex or large projects: 8-12 weeks These timeframes can vary based on our current workload and material availability. During busy periods like before Christmas or during the summer renovation season, lead times might be a bit longer. We're honest about timelines from the beginning and will always keep you updated on progress. If you have a specific deadline for a special occasion, let us know early and we'll do our best to accommodate it.
What Materials Do We Use For Custom Kitchen Furniture?
Quality materials are the foundation of furniture that lasts. We select each piece of timber carefully, looking for character, stability, and appropriateness for its intended use.
Why Choose Our Kitchen Furniture Design Service?
Custom furniture offers benefits that off-the-shelf pieces simply can't match:
Ready to Commission Custom Kitchen Furniture?
Book a free design visit for your bespoke Derby kitchen furniture. Call Derby Kitchen Fitter on 01332-529933 or email info@derbykitchenfitter.co.uk to get started.
City & • 20 Years' Experience • Licensed Waste Removal
Quick Free Estimate - No Obligation
Fully Insured • Response within 15 mins
🔒 Your details are safe with us. No spam, ever.